src/serial.c at main · doomsdayone/enhanced-x16-emulator

◆ main enhanced-x16-emulator / src / serial.c

6.1 KiB · C · last changed chore(): initial commit 25 days ago source blame history raw

// Commander X16 Emulator
// Copyright (c) 2022 Michael Steil
// All rights reserved. License: 2-clause BSD

// Commodore Bus emulation, L1: Serial Bus
// This code is hacky, buggy and incomplete, but
// it helped bringing up the serial bus on real
// hardware.

#include <stdio.h>
#include <stdint.h>
#include <stdbool.h>
#include "serial.h"
#include "ieee.h"
#include "glue.h"

serial_port_t serial_port;

static int state = 0;
static bool valid;
static int bit;
static uint8_t byte;
static bool listening = false;
static bool talking = false;
static bool during_atn = false;
static bool eoi = false;
static bool fnf = false; // file not found
static int clocks_since_last_change = 0;

#define printf(...)

static uint8_t
read_byte(bool *eoi)
{
	uint8_t byte;
	int ret = ACPTR(&byte);
	*eoi = ret >= 0;
	return byte;
}

bool
serial_port_read_clk()
{
	return serial_port.out.clk & serial_port.in.clk;
}

bool
serial_port_read_data()
{
	return serial_port.out.data & serial_port.in.data;
}

void
serial_step(int clocks)
{
	bool print = false;

	static bool old_atn = false, old_clk = false, old_data = false;
	if (old_atn == serial_port.in.atn &&
		old_clk == serial_port_read_clk() &&
		old_data == serial_port_read_data()) {
		clocks_since_last_change += clocks;
		if (state == 2 && valid == true && bit == 0 && clocks_since_last_change > 200 * MHZ) {
			if (clocks_since_last_change < (200 + 60) * MHZ) {
				printf("XXX EOI ACK\n");
				serial_port.out.data = 0;
				eoi = true;
			} else {
				printf("XXX EOI ACK END\n");
				serial_port.out.data = 1;
				clocks_since_last_change = 0;
			}
			print = true;
		}
		if (state == 10 && clocks_since_last_change > 60 * MHZ) {
			serial_port.out.clk = 1;
			state = 11;
			clocks_since_last_change = 0;
			print = true;
		} else if (state == 11 && serial_port_read_data() && !fnf) {
			clocks_since_last_change = 0;
			byte = read_byte(&eoi);
			bit = 0;
			valid = true;
			if (eoi) {
				printf("XXXEOI1\n");
				state = 12;
			} else {
				printf("XXXEOI0\n");
				serial_port.out.clk = 0;
				state = 13;
			}
			print = true;
		} else if (state == 12 && clocks_since_last_change > 512 * MHZ) {
			// EOI delay
			// XXX we'd have to check for the ACK
			clocks_since_last_change = 0;
			serial_port.out.clk = 0;
			state = 13;
			print = true;
		} else if (state == 13 && clocks_since_last_change > 60 * MHZ) {
			if (valid) {
				// send bit
				serial_port.out.data = (byte >> bit) & 1;
				serial_port.out.clk = 1;
				printf("*** BIT%d OUT: %d\n", bit, serial_port.out.data);
				bit++;
				if (bit == 8) {
					state = 14;
				}
			} else {
				serial_port.out.clk = 0;
			}
			valid = !valid;
			clocks_since_last_change = 0;
			print = true;
		} else if (state == 14 && clocks_since_last_change > 60 * MHZ) {
			serial_port.out.data = 1;
			serial_port.out.clk = 0;
			state = 10;
			clocks_since_last_change = 0;
			print = true;
		}
	} else {
		clocks_since_last_change = 0;

		printf("-SERIAL IN { ATN:%d CLK:%d DATA:%d }\n", serial_port.in.atn, old_clk, old_data);
		printf("+SERIAL IN { ATN:%d CLK:%d DATA:%d } --- IN { CLK:%d DATA:%d } OUT { CLK:%d DATA:%d } -- #%d\n", serial_port.in.atn, serial_port_read_clk(), serial_port_read_data(), serial_port.in.clk, serial_port.in.data, serial_port.out.clk, serial_port.out.data, state);

		if (!during_atn && serial_port.in.atn) {
			serial_port.out.data = 0;
			state = 99;
			during_atn = true;
			printf("XXX START OF ATN\n");
		}

		switch(state) {
			case 0:
				break;
			case 99:
				// wait for CLK=0
				if (!serial_port_read_clk()) {
					state = 1;
				}
				break;
			case 1:
				if (during_atn && !serial_port.in.atn) {
					// cancelled ATN
					serial_port.out.data = 1;
					serial_port.out.clk = 1;
					during_atn = false;
					printf("*** END OF ATN\n");
					if (listening) {
						// keep holding DATA to indicate we're here
						serial_port.out.data = 0;
						printf("XXX START OF DATA RECEIVE\n");
					} else if (talking) {
						serial_port.out.clk = 0;
						state = 10;
						printf("XXX START OF DATA SEND\n");
					} else {
						state = 0;
					}
					break;
				}
				// wait for CLK=1
				if (serial_port_read_clk()) {
					serial_port.out.data = 1;
					state = 2;
					valid = true;
					bit = 0;
					byte = 0;
					eoi = false;
					printf("XXX START OF BYTE\n");
				}
				break;
			case 2:
				if (during_atn && !serial_port.in.atn) {
					// cancelled ATN
					serial_port.out.data = 1;
					serial_port.out.clk = 1;
					printf("*** XEND OF ATN\n");
					state = 0;
					break;
				}
				if (valid) {
					// wait for CLK=0, data not valid
					if (!serial_port_read_clk()) {
						valid = false;
						printf("XXX NOT VALID\n");
					}
				} else {
					// wait for CLK=1, data valid
					if (serial_port_read_clk()) {
						bool b = serial_port_read_data();
						byte |= (b << bit);
						printf("*** BIT%d IN: %d\n", bit, b);
						valid = true;
						if (++bit == 8) {
							printf("*** %s BYTE IN: %02x%s\n", during_atn ? "ATN" : "DATA", byte, eoi ? " (EOI)" : "");
							if (during_atn) {
								printf("IEEE CMD %x\n", byte);
								switch (byte & 0x60) {
									case 0x20:
										if (byte == 0x3f) {
											UNLSN();
											listening = false;
										} else {
											LISTEN(byte);
											listening = true;
										}
										break;
									case 0x40:
										if (byte == 0x5f) {
											UNTLK();
											talking = false;
										} else {
											TALK(byte);
											talking = true;
										}
										break;
									case 0x60:
										if (listening) {
											SECOND(byte);
										} else { // talking
											TKSA(byte);
										}
										break;
								}
							} else {
								CIOUT(byte);
							}
							serial_port.out.data = 0;
							state = 1;
						}
					}
				}
				break;
			case 3:
				break;
		}
		print = true;
	}

	if (print) {
		printf(">SERIAL IN { ATN:%d CLK:%d DATA:%d } --- IN { CLK:%d DATA:%d } OUT { CLK:%d DATA:%d } -- #%d\n", serial_port.in.atn, serial_port_read_clk(), serial_port_read_data(), serial_port.in.clk, serial_port.in.data, serial_port.out.clk, serial_port.out.data, state);
	}

	old_atn = serial_port.in.atn;
	old_clk = serial_port_read_clk();
	old_data = serial_port_read_data();
}


`/`	Search
`g` `c`	Code
`g` `h`	History
`g` `b`	Bookmarks
`g` `t`	Trust
`y`	Permalink to this state (files and trees)
`?`	This sheet

9120e874 Andy McCall 25 days ago	1	// Commander X16 Emulator
	2	// Copyright (c) 2022 Michael Steil
	3	// All rights reserved. License: 2-clause BSD
	4
	5	// Commodore Bus emulation, L1: Serial Bus
	6	// This code is hacky, buggy and incomplete, but
	7	// it helped bringing up the serial bus on real
	8	// hardware.
	9
	10	#include <stdio.h>
	11	#include <stdint.h>
	12	#include <stdbool.h>
	13	#include "serial.h"
	14	#include "ieee.h"
	15	#include "glue.h"
	16
	17	serial_port_t serial_port;
	18
	19	static int state = 0;
	20	static bool valid;
	21	static int bit;
	22	static uint8_t byte;
	23	static bool listening = false;
	24	static bool talking = false;
	25	static bool during_atn = false;
	26	static bool eoi = false;
	27	static bool fnf = false; // file not found
	28	static int clocks_since_last_change = 0;
	29
	30	#define printf(...)
	31
	32	static uint8_t
	33	read_byte(bool *eoi)
	34	{
	35	uint8_t byte;
	36	int ret = ACPTR(&byte);
	37	*eoi = ret >= 0;
	38	return byte;
	39	}
	40
	41	bool
	42	serial_port_read_clk()
	43	{
	44	return serial_port.out.clk & serial_port.in.clk;
	45	}
	46
	47	bool
	48	serial_port_read_data()
	49	{
	50	return serial_port.out.data & serial_port.in.data;
	51	}
	52
	53	void
	54	serial_step(int clocks)
	55	{
	56	bool print = false;
	57
	58	static bool old_atn = false, old_clk = false, old_data = false;
	59	if (old_atn == serial_port.in.atn &&
	60	old_clk == serial_port_read_clk() &&
	61	old_data == serial_port_read_data()) {
	62	clocks_since_last_change += clocks;
	63	if (state == 2 && valid == true && bit == 0 && clocks_since_last_change > 200 * MHZ) {
	64	if (clocks_since_last_change < (200 + 60) * MHZ) {
65	printf("XXX EOI ACK\n");
66	serial_port.out.data = 0;
67	eoi = true;
68	} else {
69	printf("XXX EOI ACK END\n");
70	serial_port.out.data = 1;
71	clocks_since_last_change = 0;
72	}
73	print = true;
74	}
75	if (state == 10 && clocks_since_last_change > 60 * MHZ) {
76	serial_port.out.clk = 1;
77	state = 11;
78	clocks_since_last_change = 0;
79	print = true;
80	} else if (state == 11 && serial_port_read_data() && !fnf) {
81	clocks_since_last_change = 0;
82	byte = read_byte(&eoi);
83	bit = 0;
84	valid = true;
85	if (eoi) {
86	printf("XXXEOI1\n");
87	state = 12;
88	} else {
89	printf("XXXEOI0\n");
90	serial_port.out.clk = 0;
91	state = 13;
92	}
93	print = true;
94	} else if (state == 12 && clocks_since_last_change > 512 * MHZ) {
95	// EOI delay
96	// XXX we'd have to check for the ACK
97	clocks_since_last_change = 0;
98	serial_port.out.clk = 0;
99	state = 13;
100	print = true;
101	} else if (state == 13 && clocks_since_last_change > 60 * MHZ) {
102	if (valid) {
103	// send bit
104	serial_port.out.data = (byte >> bit) & 1;
105	serial_port.out.clk = 1;
106	printf("*** BIT%d OUT: %d\n", bit, serial_port.out.data);
107	bit++;
108	if (bit == 8) {
109	state = 14;
110	}
111	} else {
112	serial_port.out.clk = 0;
113	}
114	valid = !valid;
115	clocks_since_last_change = 0;
116	print = true;
117	} else if (state == 14 && clocks_since_last_change > 60 * MHZ) {
118	serial_port.out.data = 1;
119	serial_port.out.clk = 0;
120	state = 10;
121	clocks_since_last_change = 0;
122	print = true;
123	}
124	} else {
125	clocks_since_last_change = 0;
126
127	printf("-SERIAL IN { ATN:%d CLK:%d DATA:%d }\n", serial_port.in.atn, old_clk, old_data);
128	printf("+SERIAL IN { ATN:%d CLK:%d DATA:%d } --- IN { CLK:%d DATA:%d } OUT { CLK:%d DATA:%d } -- #%d\n", serial_port.in.atn, serial_port_read_clk(), serial_port_read_data(), serial_port.in.clk, serial_port.in.data, serial_port.out.clk, serial_port.out.data, state);
129
130	if (!during_atn && serial_port.in.atn) {
131	serial_port.out.data = 0;
132	state = 99;
133	during_atn = true;
134	printf("XXX START OF ATN\n");
135	}
136
137	switch(state) {
138	case 0:
139	break;
140	case 99:
141	// wait for CLK=0
142	if (!serial_port_read_clk()) {
143	state = 1;
144	}
145	break;
146	case 1:
147	if (during_atn && !serial_port.in.atn) {
148	// cancelled ATN
149	serial_port.out.data = 1;
150	serial_port.out.clk = 1;
151	during_atn = false;
152	printf("*** END OF ATN\n");
153	if (listening) {
154	// keep holding DATA to indicate we're here
155	serial_port.out.data = 0;
156	printf("XXX START OF DATA RECEIVE\n");
157	} else if (talking) {
158	serial_port.out.clk = 0;
159	state = 10;
160	printf("XXX START OF DATA SEND\n");
161	} else {
162	state = 0;
163	}
164	break;
165	}
166	// wait for CLK=1
167	if (serial_port_read_clk()) {
168	serial_port.out.data = 1;
169	state = 2;
170	valid = true;
171	bit = 0;
172	byte = 0;
173	eoi = false;
174	printf("XXX START OF BYTE\n");
175	}
176	break;
177	case 2:
178	if (during_atn && !serial_port.in.atn) {
179	// cancelled ATN
180	serial_port.out.data = 1;
181	serial_port.out.clk = 1;
182	printf("*** XEND OF ATN\n");
183	state = 0;
184	break;
185	}
186	if (valid) {
187	// wait for CLK=0, data not valid
188	if (!serial_port_read_clk()) {
189	valid = false;
190	printf("XXX NOT VALID\n");
191	}
192	} else {
193	// wait for CLK=1, data valid
194	if (serial_port_read_clk()) {
195	bool b = serial_port_read_data();
196	byte \|= (b << bit);
197	printf("*** BIT%d IN: %d\n", bit, b);
198	valid = true;
199	if (++bit == 8) {
200	printf("*** %s BYTE IN: %02x%s\n", during_atn ? "ATN" : "DATA", byte, eoi ? " (EOI)" : "");
201	if (during_atn) {
202	printf("IEEE CMD %x\n", byte);
203	switch (byte & 0x60) {
204	case 0x20:
205	if (byte == 0x3f) {
206	UNLSN();
207	listening = false;
208	} else {
209	LISTEN(byte);
210	listening = true;
211	}
212	break;
213	case 0x40:
214	if (byte == 0x5f) {
215	UNTLK();
216	talking = false;
217	} else {
218	TALK(byte);
219	talking = true;
220	}
221	break;
222	case 0x60:
223	if (listening) {
224	SECOND(byte);
225	} else { // talking
226	TKSA(byte);
227	}
228	break;
229	}
230	} else {
231	CIOUT(byte);
232	}
233	serial_port.out.data = 0;
234	state = 1;
235	}
236	}
237	}
238	break;
239	case 3:
240	break;
241	}
242	print = true;
243	}
244
245	if (print) {
246	printf(">SERIAL IN { ATN:%d CLK:%d DATA:%d } --- IN { CLK:%d DATA:%d } OUT { CLK:%d DATA:%d } -- #%d\n", serial_port.in.atn, serial_port_read_clk(), serial_port_read_data(), serial_port.in.clk, serial_port.in.data, serial_port.out.clk, serial_port.out.data, state);
247	}
248
249	old_atn = serial_port.in.atn;
250	old_clk = serial_port_read_clk();
251	old_data = serial_port_read_data();
252	}
253

Keyboard