src/sound/SCC.cc at main · doomsdayone/openmsx

◆ main openmsx / src / sound / SCC.cc

16.9 KiB · C++ · last changed chore(): initial commit 1 month ago source blame history raw

//-----------------------------------------------------------------------------
//
// On Mon, 24 Feb 2003, Jon De Schrijder wrote:
//
// I've done some measurements with the scope on the output of the SCC.
// I didn't do timing tests, only amplitude checks:
//
// I know now for sure, the amplitude calculation works as follows:
//
// AmpOut=640+AmpA+AmpB+AmpC+AmpD+AmpE
//
// range AmpOut (11 bits positive number=SCC digital output): [+40...+1235]
//
// AmpA="((SampleValue*VolA) AND #7FF0) div 16"
// AmpB="((SampleValue*VolB) AND #7FF0) div 16"
// AmpC="((SampleValue*VolC) AND #7FF0) div 16"
// AmpD="((SampleValue*VolD) AND #7FF0) div 16"
// AmpE="((SampleValue*VolE) AND #7FF0) div 16"
//
// Setting the enable bit to zero, corresponds with VolX=0.
//
// SampleValue range [-128...+127]
// VolX range [0..15]
//
// Notes:
// * SampleValue*VolX is calculated (signed multiplication) and the lower 4
//   bits are dropped (both in case the value is positive or negative), before
//   the addition of the 5 values is done. This was tested by setting
//   SampleValue=+1 and VolX=15 of different channels. The resulting AmpOut=640,
//   indicating that the 4 lower bits were dropped *before* the addition.
//
//-----------------------------------------------------------------------------
//
// On Mon, 14 Apr 2003, Manuel Pazos wrote
//
// I have some info about SCC/SCC+ that I hope you find useful. It is about
// "Mode Setting Register", also called "Deformation Register" Here it goes:
//
//    bit0: 4 bits frequency (%XXXX00000000). Equivalent to
//          (normal frequency >> 8) bits0-7 are ignored
//    bit1: 8 bits frequency (%0000XXXXXXXX) bits8-11 are ignored
//    bit2:
//    bit3:
//    bit4:
//    bit5: wave data is played from beginning when frequency is changed
//    bit6: rotate all waves data. You can't write to them. Rotation speed
//          =3.58Mhz / (channel i frequency + 1)
//    bit7: rotate channel 4 wave data. You can't write to that channel
//          data.ONLY works in MegaROM SCC (not in SCC+)
//
// If bit7 and bit6 are set, only channel 1-3 wave data rotates . You can't
// write to ANY wave data. And there is a weird behaviour in this setting. It
// seems SCC sound is corrupted in anyway with MSX databus or so. Try to
// activate them (with proper waves, freqs, and vol.) and execute DIR command
// on DOS. You will hear "noise" This seems to be fixed in SCC+
//
// Reading Mode Setting Register, is equivalent to write #FF to it.
//
// - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
//
// Additions:
//   - Setting both bit0 and bit1 is equivalent to setting only bit1
//   - A rotation goes like this:
//       waveData[0:31] = waveData[1:31].waveData[0]
//   - Channel 4-5 rotation speed is set by channel 5 freq (channel 4 freq
//     is ignored for rotation)
//
// Also see this MRC thread:
//  http://www.msx.org/forumtopicl7875.html
//
//-----------------------------------------------------------------------------
//
// On Sat, 09 Sep 2005, NYYRIKKI wrote (MRC post)
//
// ...
//
// One important thing to know is that change of volume is not implemented
// immediately in SCC. Normally it is changed when next byte from sample memory
// is played, but writing value to frequency causes current byte to be started
// again. As in this example we write values very quickly to frequency registers
// the internal sample counter does not actually move at all.
//
// Third method is a variation of first method. As we don't know where SCC is
// playing, let's update the whole sample memory with one and same new value.
// To make sample rate not variable in low sample rates we first stop SCC from
// reading sample memory. This can be done by writing value less than 9 to
// frequency. Now we can update sample RAM so, that output does not change.
// After sample RAM has been updated, we start SCC internal counter so that
// value (where ever the counter was) is sent to output. This routine can be
// found below as example 3.
//
// ...
//
//
//
// Something completely different: the SCC+ is actually called SCC-I.
//-----------------------------------------------------------------------------

#include "SCC.hh"

#include "DeviceConfig.hh"

#include "cstd.hh"
#include "enumerate.hh"
#include "outer.hh"
#include "serialize.hh"
#include "unreachable.hh"
#include "xrange.hh"

#include <algorithm>
#include <array>
#include <cmath>

namespace openmsx {

static constexpr auto INPUT_RATE = unsigned(cstd::round(3579545.0 / 32));

static constexpr auto calcDescription(SCC::Mode mode)
{
	return (mode == SCC::Mode::Real) ? static_string_view("Konami SCC")
	                                 : static_string_view("Konami SCC+");
}

SCC::SCC(const std::string& name_, const DeviceConfig& config,
         EmuTime time, Mode mode)
	: ResampledSoundDevice(
		config.getMotherBoard(), name_, calcDescription(mode), 5, INPUT_RATE, false)
	, debuggable(config.getMotherBoard(), getName())
	, deformTimer(time)
	, currentMode(mode)
{
	// Make valgrind happy
	std::ranges::fill(orgPeriod, 0);

	powerUp(time);
	registerSound(config);
}

SCC::~SCC()
{
	unregisterSound();
}

void SCC::powerUp(EmuTime time)
{
	// Power on values, tested by enen (log from IRC #openmsx):
	//
	//  <enen>    wouter_: i did an scc poweron values test, deform=0,
	//            amplitude=full, channelEnable=0, period=under 8
	//    ...
	//  <wouter_> did you test the value of the waveforms as well?
	//    ...
	//  <enen>    filled with $FF, some bits cleared but that seems random

	// Initialize ch_enable, deform (initialize this before period)
	reset(time);

	// Initialize waveforms (initialize before volumes)
	for (auto& w1 : wave) {
		std::ranges::fill(w1, ~0);
	}
	// Initialize volume (initialize this before period)
	for (auto i : xrange(5)) {
		setFreqVol(i + 10, 15, time);
	}
	// Actual initial value is difficult to measure, assume zero
	// (initialize before period)
	std::ranges::fill(pos, 0);

	// Initialize period (sets members orgPeriod, period, incr, count, out)
	for (auto i : xrange(2 * 5)) {
		setFreqVol(i, 0, time);
	}
}

void SCC::reset(EmuTime /*time*/)
{
	if (currentMode != Mode::Real) {
		setMode(Mode::Compatible);
	}

	setDeformRegHelper(0);
	ch_enable = 0;
}

void SCC::setMode(Mode newMode)
{
	if (currentMode == Mode::Real) {
		assert(newMode == Mode::Real);
	} else {
		assert(newMode != Mode::Real);
	}
	currentMode = newMode;
}

uint8_t SCC::readMem(uint8_t addr, EmuTime time)
{
	// Deform-register locations:
	//   SCC_Real:       0xE0..0xFF
	//   SCC_Compatible: 0xC0..0xDF
	//   SCC_plusmode:   0xC0..0xDF
	if (((currentMode == Mode::Real) && (addr >= 0xE0)) ||
	    ((currentMode != Mode::Real) && (0xC0 <= addr) && (addr < 0xE0))) {
		setDeformReg(0xFF, time);
	}
	return peekMem(addr, time);
}

uint8_t SCC::peekMem(uint8_t address, EmuTime time) const
{
	switch (currentMode) {
	case Mode::Real:
		if (address < 0x80) {
			// 0x00..0x7F : read wave form 1..4
			return readWave(address >> 5, address, time);
		} else {
			// 0x80..0x9F : freq volume block, write only
			// 0xA0..0xDF : no function
			// 0xE0..0xFF : deformation register
			return 0xFF;
		}
	case Mode::Compatible:
		if (address < 0x80) {
			// 0x00..0x7F : read wave form 1..4
			return readWave(address >> 5, address, time);
		} else if (address < 0xA0) {
			// 0x80..0x9F : freq volume block
			return 0xFF;
		} else if (address < 0xC0) {
			// 0xA0..0xBF : read wave form 5
			return readWave(4, address, time);
		} else {
			// 0xC0..0xDF : deformation register
			// 0xE0..0xFF : no function
			return 0xFF;
		}
	case Mode::Plus:
		if (address < 0xA0) {
			// 0x00..0x9F : read wave form 1..5
			return readWave(address >> 5, address, time);
		} else {
			// 0xA0..0xBF : freq volume block
			// 0xC0..0xDF : deformation register
			// 0xE0..0xFF : no function
			return 0xFF;
		}
	default:
		UNREACHABLE;
	}
}

uint8_t SCC::readWave(unsigned channel, unsigned address, EmuTime time) const
{
	if (!rotate[channel]) {
		return wave[channel][address & 0x1F];
	} else {
		unsigned ticks = deformTimer.getTicksTill(time);
		unsigned periodCh = ((channel == 3) &&
		                     (currentMode != Mode::Plus) &&
		                     ((deformValue & 0xC0) == 0x40))
		                  ? 4 : channel;
		unsigned shift = ticks / (period[periodCh] + 1);
		return wave[channel][(address + shift) & 0x1F];
	}
}


uint8_t SCC::getFreqVol(unsigned address) const
{
	address &= 0x0F;
	if (address < 0x0A) {
		// get frequency
		unsigned channel = address / 2;
		if (address & 1) {
			return narrow_cast<uint8_t>(orgPeriod[channel] >> 8);
		} else {
			return narrow_cast<uint8_t>(orgPeriod[channel] & 0xFF);
		}
	} else if (address < 0x0F) {
		// get volume
		return volume[address - 0xA];
	} else {
		// get enable-bits
		return ch_enable;
	}
}

void SCC::writeMem(uint8_t address, uint8_t value, EmuTime time)
{
	updateStream(time);

	switch (currentMode) {
	case Mode::Real:
		if (address < 0x80) {
			// 0x00..0x7F : write wave form 1..4
			writeWave(address >> 5, address, value);
		} else if (address < 0xA0) {
			// 0x80..0x9F : freq volume block
			setFreqVol(address, value, time);
		} else if (address < 0xE0) {
			// 0xA0..0xDF : no function
		} else {
			// 0xE0..0xFF : deformation register
			setDeformReg(value, time);
		}
		break;
	case Mode::Compatible:
		if (address < 0x80) {
			// 0x00..0x7F : write wave form 1..4
			writeWave(address >> 5, address, value);
		} else if (address < 0xA0) {
			// 0x80..0x9F : freq volume block
			setFreqVol(address, value, time);
		} else if (address < 0xC0) {
			// 0xA0..0xBF : ignore write wave form 5
		} else if (address < 0xE0) {
			// 0xC0..0xDF : deformation register
			setDeformReg(value, time);
		} else {
			// 0xE0..0xFF : no function
		}
		break;
	case Mode::Plus:
		if (address < 0xA0) {
			// 0x00..0x9F : write wave form 1..5
			writeWave(address >> 5, address, value);
		} else if (address < 0xC0) {
			// 0xA0..0xBF : freq volume block
			setFreqVol(address, value, time);
		} else if (address < 0xE0) {
			// 0xC0..0xDF : deformation register
			setDeformReg(value, time);
		} else {
			// 0xE0..0xFF : no function
		}
		break;
	default:
		UNREACHABLE;
	}
}

float SCC::getAmplificationFactorImpl() const
{
	return 1.0f / 128.0f;
}

static constexpr float adjust(int8_t wav, uint8_t vol)
{
	// The result is an integer value, but we store it as a float because
	// then we need fewer int->float conversion (compared to converting in
	// generateChannels()).
	return float((int(wav) * vol) >> 4);
}

void SCC::writeWave(unsigned channel, unsigned address, uint8_t value)
{
	// write to channel 5 only possible in SCC+ mode
	assert(channel < 5);
	assert((channel != 4) || (currentMode == Mode::Plus));

	if (!readOnly[channel]) {
		unsigned p = address & 0x1F;
		auto sValue = narrow_cast<int8_t>(value);
		wave[channel][p] = sValue;
		volAdjustedWave[channel][p] = adjust(sValue, volume[channel]);
		if ((currentMode != Mode::Plus) && (channel == 3)) {
			// copy waveform 4 -> waveform 5
			wave[4][p] = wave[3][p];
			volAdjustedWave[4][p] = adjust(sValue, volume[4]);
		}
	}
}

void SCC::setFreqVol(unsigned address, uint8_t value, EmuTime time)
{
	address &= 0x0F; // region is visible twice
	if (address < 0x0A) {
		// change frequency
		unsigned channel = address / 2;
		unsigned per =
			  (address & 1)
			? ((value & 0xF) << 8) | (orgPeriod[channel] & 0xFF)
			: (orgPeriod[channel] & 0xF00) | (value & 0xFF);
		orgPeriod[channel] = per;
		if (deformValue & 2) {
			// 8 bit frequency
			per &= 0xFF;
		} else if (deformValue & 1) {
			// 4 bit frequency
			per >>= 8;
		}
		period[channel] = per;
		incr[channel] = (per <= 8) ? 0 : 32;
		count[channel] = 0; // reset to begin of byte
		if (deformValue & 0x20) {
			pos[channel] = 0; // reset to begin of waveform
			// also 'rotation' mode (confirmed by test based on
			// Artag's SCC sample player)
			deformTimer.advance(time);
		}
		// after a freq change, update the output
		out[channel] = volAdjustedWave[channel][pos[channel]];
	} else if (address < 0x0F) {
		// change volume
		unsigned channel = address - 0x0A;
		volume[channel] = value & 0xF;
		for (auto i : xrange(32)) {
			volAdjustedWave[channel][i] =
				adjust(wave[channel][i], volume[channel]);
		}
	} else {
		// change enable-bits
		ch_enable = value;
	}
}

void SCC::setDeformReg(uint8_t value, EmuTime time)
{
	if (value == deformValue) {
		return;
	}
	deformTimer.advance(time);
	setDeformRegHelper(value);
}

void SCC::setDeformRegHelper(uint8_t value)
{
	deformValue = value;
	if (currentMode != Mode::Real) {
		value &= ~0x80;
	}
	switch (value & 0xC0) {
	case 0x00:
		std::ranges::fill(rotate, false);
		std::ranges::fill(readOnly, false);
		break;
	case 0x40:
		std::ranges::fill(rotate, true);
		std::ranges::fill(readOnly, true);
		break;
	case 0x80:
		for (auto i : xrange(3)) {
			rotate[i] = false;
			readOnly[i] = false;
		}
		for (auto i : xrange(3, 5)) {
			rotate[i] = true;
			readOnly[i] = true;
		}
		break;
	case 0xC0:
		for (auto i : xrange(3)) {
			rotate[i] = true;
			readOnly[i] = true;
		}
		for (auto i : xrange(3, 5)) {
			rotate[i] = false;
			readOnly[i] = true;
		}
		break;
	default:
		UNREACHABLE;
	}
}

void SCC::generateChannels(std::span<float*> bufs, unsigned num)
{
	unsigned enable = ch_enable;
	for (unsigned i = 0; i < 5; ++i, enable >>= 1) {
		if ((enable & 1) && (volume[i] || (out[i] != 0.0f))) {
			auto out2 = out[i];
			unsigned count2 = count[i];
			unsigned pos2 = pos[i];
			unsigned incr2 = incr[i];
			unsigned period2 = period[i] + 1;
			for (auto j : xrange(num)) {
				bufs[i][j] += out2;
				count2 += incr2;
				// Note: only for very small periods
				//       this will take more than 1 iteration
				while (count2 >= period2) [[unlikely]] {
					count2 -= period2;
					pos2 = (pos2 + 1) % 32;
					out2 = volAdjustedWave[i][pos2];
				}
			}
			out[i] = out2;
			count[i] = count2;
			pos[i] = pos2;
		} else {
			bufs[i] = nullptr; // channel muted
			// Update phase counter.
			unsigned newCount = count[i] + num * incr[i];
			count[i] = newCount % (period[i] + 1);
			pos[i] = (pos[i] + newCount / (period[i] + 1)) % 32;
			// Channel stays off until next waveform index.
			out[i] = 0.0f;
		}
	}
}


// Debuggable

SCC::Debuggable::Debuggable(MSXMotherBoard& motherBoard_, const std::string& name_)
	: SimpleDebuggable(motherBoard_, name_ + " SCC",
	                   "SCC registers in SCC+ format", 0x100)
{
}

uint8_t SCC::Debuggable::read(unsigned address, EmuTime time)
{
	const auto& scc = OUTER(SCC, debuggable);
	if (address < 0xA0) {
		// read wave form 1..5
		return scc.readWave(address >> 5, address, time);
	} else if (address < 0xC0) {
		// freq volume block
		return scc.getFreqVol(address);
	} else if (address < 0xE0) {
		// peek deformation register
		return scc.deformValue;
	} else {
		return 0xFF;
	}
}

void SCC::Debuggable::write(unsigned address, uint8_t value, EmuTime time)
{
	auto& scc = OUTER(SCC, debuggable);
	if (address < 0xA0) {
		// read wave form 1..5
		scc.writeWave(address >> 5, address, value);
	} else if (address < 0xC0) {
		// freq volume block
		scc.setFreqVol(address, value, time);
	} else if (address < 0xE0) {
		// deformation register
		scc.setDeformReg(value, time);
	} else {
		// ignore
	}
}


static constexpr auto chipModeInfo = std::to_array<enum_string<SCC::Mode>>({
	{ "Real",       SCC::Mode::Real       },
	{ "Compatible", SCC::Mode::Compatible },
	{ "Plus",       SCC::Mode::Plus   },
});
SERIALIZE_ENUM(SCC::Mode, chipModeInfo);

template<typename Archive>
void SCC::serialize(Archive& ar, unsigned /*version*/)
{
	ar.serialize("mode",        currentMode,
	             "period",      orgPeriod,
	             "volume",      volume,
	             "ch_enable",   ch_enable,
	             "deformTimer", deformTimer,
	             "deform",      deformValue);
	// multi-dimensional arrays are not directly support by the
	// serialization framework, maybe in the future. So for now
	// manually loop over the channels.
	std::array<char, 6> tag = {'w', 'a', 'v', 'e', 'X', 0};
	for (auto [channel, wv] : enumerate(wave)) {
		tag[4] = char('1' + channel);
		ar.serialize(tag.data(), wv); // signed char
	}

	if constexpr (Archive::IS_LOADER) {
		// recalculate volAdjustedWave
		for (auto channel : xrange(5)) {
			for (auto p : xrange(32)) {
				volAdjustedWave[channel][p] =
					adjust(wave[channel][p], volume[channel]);
			}
		}

		// recalculate rotate[5] and readOnly[5]
		setDeformRegHelper(deformValue);

		// recalculate incr[5] and period[5]
		//  this also (possibly) changes count[5], pos[5] and out[5]
		//  as an unwanted side-effect, so (de)serialize those later
		// Don't use current time, but instead use deformTimer, to
		// avoid changing the value of deformTimer.
		EmuTime time = deformTimer.getTime();
		for (auto channel : xrange(5)) {
			unsigned per = orgPeriod[channel];
			setFreqVol(2 * channel + 0, (per & 0x0FF) >> 0, time);
			setFreqVol(2 * channel + 1, (per & 0xF00) >> 8, time);
		}
	}

	// call to setFreqVol() modifies these variables, see above
	ar.serialize("count", count,
	             "pos",   pos,
	             "out",   out); // note: changed int->float, but no need to bump serialize-version
}
INSTANTIATE_SERIALIZE_METHODS(SCC);

} // namespace openmsx

`/`	Search
`g` `c`	Code
`g` `h`	History
`g` `b`	Bookmarks
`g` `t`	Trust
`y`	Permalink to this state (files and trees)
`?`	This sheet

e8555c89 Andy McCall 1 month ago	1	//-----------------------------------------------------------------------------
	2	//
	3	// On Mon, 24 Feb 2003, Jon De Schrijder wrote:
	4	//
	5	// I've done some measurements with the scope on the output of the SCC.
	6	// I didn't do timing tests, only amplitude checks:
	7	//
	8	// I know now for sure, the amplitude calculation works as follows:
	9	//
	10	// AmpOut=640+AmpA+AmpB+AmpC+AmpD+AmpE
	11	//
	12	// range AmpOut (11 bits positive number=SCC digital output): [+40...+1235]
	13	//
	14	// AmpA="((SampleValue*VolA) AND #7FF0) div 16"
	15	// AmpB="((SampleValue*VolB) AND #7FF0) div 16"
	16	// AmpC="((SampleValue*VolC) AND #7FF0) div 16"
	17	// AmpD="((SampleValue*VolD) AND #7FF0) div 16"
	18	// AmpE="((SampleValue*VolE) AND #7FF0) div 16"
	19	//
	20	// Setting the enable bit to zero, corresponds with VolX=0.
	21	//
	22	// SampleValue range [-128...+127]
	23	// VolX range [0..15]
	24	//
	25	// Notes:
	26	// * SampleValue*VolX is calculated (signed multiplication) and the lower 4
	27	// bits are dropped (both in case the value is positive or negative), before
	28	// the addition of the 5 values is done. This was tested by setting
	29	// SampleValue=+1 and VolX=15 of different channels. The resulting AmpOut=640,
	30	// indicating that the 4 lower bits were dropped before the addition.
	31	//
	32	//-----------------------------------------------------------------------------
	33	//
	34	// On Mon, 14 Apr 2003, Manuel Pazos wrote
	35	//
	36	// I have some info about SCC/SCC+ that I hope you find useful. It is about
	37	// "Mode Setting Register", also called "Deformation Register" Here it goes:
	38	//
	39	// bit0: 4 bits frequency (%XXXX00000000). Equivalent to
	40	// (normal frequency >> 8) bits0-7 are ignored
	41	// bit1: 8 bits frequency (%0000XXXXXXXX) bits8-11 are ignored
	42	// bit2:
	43	// bit3:
	44	// bit4:
	45	// bit5: wave data is played from beginning when frequency is changed
	46	// bit6: rotate all waves data. You can't write to them. Rotation speed
	47	// =3.58Mhz / (channel i frequency + 1)
	48	// bit7: rotate channel 4 wave data. You can't write to that channel
	49	// data.ONLY works in MegaROM SCC (not in SCC+)
	50	//
	51	// If bit7 and bit6 are set, only channel 1-3 wave data rotates . You can't
	52	// write to ANY wave data. And there is a weird behaviour in this setting. It
	53	// seems SCC sound is corrupted in anyway with MSX databus or so. Try to
	54	// activate them (with proper waves, freqs, and vol.) and execute DIR command
	55	// on DOS. You will hear "noise" This seems to be fixed in SCC+
	56	//
	57	// Reading Mode Setting Register, is equivalent to write #FF to it.
	58	//
	59	// - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
	60	//
	61	// Additions:
	62	// - Setting both bit0 and bit1 is equivalent to setting only bit1
	63	// - A rotation goes like this:
	64	// waveData[0:31] = waveData[1:31].waveData[0]
65	// - Channel 4-5 rotation speed is set by channel 5 freq (channel 4 freq
66	// is ignored for rotation)
67	//
68	// Also see this MRC thread:
69	// http://www.msx.org/forumtopicl7875.html
70	//
71	//-----------------------------------------------------------------------------
72	//
73	// On Sat, 09 Sep 2005, NYYRIKKI wrote (MRC post)
74	//
75	// ...
76	//
77	// One important thing to know is that change of volume is not implemented
78	// immediately in SCC. Normally it is changed when next byte from sample memory
79	// is played, but writing value to frequency causes current byte to be started
80	// again. As in this example we write values very quickly to frequency registers
81	// the internal sample counter does not actually move at all.
82	//
83	// Third method is a variation of first method. As we don't know where SCC is
84	// playing, let's update the whole sample memory with one and same new value.
85	// To make sample rate not variable in low sample rates we first stop SCC from
86	// reading sample memory. This can be done by writing value less than 9 to
87	// frequency. Now we can update sample RAM so, that output does not change.
88	// After sample RAM has been updated, we start SCC internal counter so that
89	// value (where ever the counter was) is sent to output. This routine can be
90	// found below as example 3.
91	//
92	// ...
93	//
94	//
95	//
96	// Something completely different: the SCC+ is actually called SCC-I.
97	//-----------------------------------------------------------------------------
98
99	#include "SCC.hh"
100
101	#include "DeviceConfig.hh"
102
103	#include "cstd.hh"
104	#include "enumerate.hh"
105	#include "outer.hh"
106	#include "serialize.hh"
107	#include "unreachable.hh"
108	#include "xrange.hh"
109
110	#include <algorithm>
111	#include <array>
112	#include <cmath>
113
114	namespace openmsx {
115
116	static constexpr auto INPUT_RATE = unsigned(cstd::round(3579545.0 / 32));
117
118	static constexpr auto calcDescription(SCC::Mode mode)
119	{
120	return (mode == SCC::Mode::Real) ? static_string_view("Konami SCC")
121	: static_string_view("Konami SCC+");
122	}
123
124	SCC::SCC(const std::string& name_, const DeviceConfig& config,
125	EmuTime time, Mode mode)
126	: ResampledSoundDevice(
127	config.getMotherBoard(), name_, calcDescription(mode), 5, INPUT_RATE, false)
128	, debuggable(config.getMotherBoard(), getName())
129	, deformTimer(time)
130	, currentMode(mode)
131	{
132	// Make valgrind happy
133	std::ranges::fill(orgPeriod, 0);
134
135	powerUp(time);
136	registerSound(config);
137	}
138
139	SCC::~SCC()
140	{
141	unregisterSound();
142	}
143
144	void SCC::powerUp(EmuTime time)
145	{
146	// Power on values, tested by enen (log from IRC #openmsx):
147	//
148	// <enen> wouter_: i did an scc poweron values test, deform=0,
149	// amplitude=full, channelEnable=0, period=under 8
150	// ...
151	// <wouter_> did you test the value of the waveforms as well?
152	// ...
153	// <enen> filled with $FF, some bits cleared but that seems random
154
155	// Initialize ch_enable, deform (initialize this before period)
156	reset(time);
157
158	// Initialize waveforms (initialize before volumes)
159	for (auto& w1 : wave) {
160	std::ranges::fill(w1, ~0);
161	}
162	// Initialize volume (initialize this before period)
163	for (auto i : xrange(5)) {
164	setFreqVol(i + 10, 15, time);
165	}
166	// Actual initial value is difficult to measure, assume zero
167	// (initialize before period)
168	std::ranges::fill(pos, 0);
169
170	// Initialize period (sets members orgPeriod, period, incr, count, out)
171	for (auto i : xrange(2 * 5)) {
172	setFreqVol(i, 0, time);
173	}
174	}
175
176	void SCC::reset(EmuTime /time/)
177	{
178	if (currentMode != Mode::Real) {
179	setMode(Mode::Compatible);
180	}
181
182	setDeformRegHelper(0);
183	ch_enable = 0;
184	}
185
186	void SCC::setMode(Mode newMode)
187	{
188	if (currentMode == Mode::Real) {
189	assert(newMode == Mode::Real);
190	} else {
191	assert(newMode != Mode::Real);
192	}
193	currentMode = newMode;
194	}
195
196	uint8_t SCC::readMem(uint8_t addr, EmuTime time)
197	{
198	// Deform-register locations:
199	// SCC_Real: 0xE0..0xFF
200	// SCC_Compatible: 0xC0..0xDF
201	// SCC_plusmode: 0xC0..0xDF
202	if (((currentMode == Mode::Real) && (addr >= 0xE0)) \|\|
203	((currentMode != Mode::Real) && (0xC0 <= addr) && (addr < 0xE0))) {
204	setDeformReg(0xFF, time);
205	}
206	return peekMem(addr, time);
207	}
208
209	uint8_t SCC::peekMem(uint8_t address, EmuTime time) const
210	{
211	switch (currentMode) {
212	case Mode::Real:
213	if (address < 0x80) {
214	// 0x00..0x7F : read wave form 1..4
215	return readWave(address >> 5, address, time);
216	} else {
217	// 0x80..0x9F : freq volume block, write only
218	// 0xA0..0xDF : no function
219	// 0xE0..0xFF : deformation register
220	return 0xFF;
221	}
222	case Mode::Compatible:
223	if (address < 0x80) {
224	// 0x00..0x7F : read wave form 1..4
225	return readWave(address >> 5, address, time);
226	} else if (address < 0xA0) {
227	// 0x80..0x9F : freq volume block
228	return 0xFF;
229	} else if (address < 0xC0) {
230	// 0xA0..0xBF : read wave form 5
231	return readWave(4, address, time);
232	} else {
233	// 0xC0..0xDF : deformation register
234	// 0xE0..0xFF : no function
235	return 0xFF;
236	}
237	case Mode::Plus:
238	if (address < 0xA0) {
239	// 0x00..0x9F : read wave form 1..5
240	return readWave(address >> 5, address, time);
241	} else {
242	// 0xA0..0xBF : freq volume block
243	// 0xC0..0xDF : deformation register
244	// 0xE0..0xFF : no function
245	return 0xFF;
246	}
247	default:
248	UNREACHABLE;
249	}
250	}
251
252	uint8_t SCC::readWave(unsigned channel, unsigned address, EmuTime time) const
253	{
254	if (!rotate[channel]) {
255	return wave[channel][address & 0x1F];
256	} else {
257	unsigned ticks = deformTimer.getTicksTill(time);
258	unsigned periodCh = ((channel == 3) &&
259	(currentMode != Mode::Plus) &&
260	((deformValue & 0xC0) == 0x40))
261	? 4 : channel;
262	unsigned shift = ticks / (period[periodCh] + 1);
263	return wave[channel][(address + shift) & 0x1F];
264	}
265	}
266
267
268	uint8_t SCC::getFreqVol(unsigned address) const
269	{
270	address &= 0x0F;
271	if (address < 0x0A) {
272	// get frequency
273	unsigned channel = address / 2;
274	if (address & 1) {
275	return narrow_cast<uint8_t>(orgPeriod[channel] >> 8);
276	} else {
277	return narrow_cast<uint8_t>(orgPeriod[channel] & 0xFF);
278	}
279	} else if (address < 0x0F) {
280	// get volume
281	return volume[address - 0xA];
282	} else {
283	// get enable-bits
284	return ch_enable;
285	}
286	}
287
288	void SCC::writeMem(uint8_t address, uint8_t value, EmuTime time)
289	{
290	updateStream(time);
291
292	switch (currentMode) {
293	case Mode::Real:
294	if (address < 0x80) {
295	// 0x00..0x7F : write wave form 1..4
296	writeWave(address >> 5, address, value);
297	} else if (address < 0xA0) {
298	// 0x80..0x9F : freq volume block
299	setFreqVol(address, value, time);
300	} else if (address < 0xE0) {
301	// 0xA0..0xDF : no function
302	} else {
303	// 0xE0..0xFF : deformation register
304	setDeformReg(value, time);
305	}
306	break;
307	case Mode::Compatible:
308	if (address < 0x80) {
309	// 0x00..0x7F : write wave form 1..4
310	writeWave(address >> 5, address, value);
311	} else if (address < 0xA0) {
312	// 0x80..0x9F : freq volume block
313	setFreqVol(address, value, time);
314	} else if (address < 0xC0) {
315	// 0xA0..0xBF : ignore write wave form 5
316	} else if (address < 0xE0) {
317	// 0xC0..0xDF : deformation register
318	setDeformReg(value, time);
319	} else {
320	// 0xE0..0xFF : no function
321	}
322	break;
323	case Mode::Plus:
324	if (address < 0xA0) {
325	// 0x00..0x9F : write wave form 1..5
326	writeWave(address >> 5, address, value);
327	} else if (address < 0xC0) {
328	// 0xA0..0xBF : freq volume block
329	setFreqVol(address, value, time);
330	} else if (address < 0xE0) {
331	// 0xC0..0xDF : deformation register
332	setDeformReg(value, time);
333	} else {
334	// 0xE0..0xFF : no function
335	}
336	break;
337	default:
338	UNREACHABLE;
339	}
340	}
341
342	float SCC::getAmplificationFactorImpl() const
343	{
344	return 1.0f / 128.0f;
345	}
346
347	static constexpr float adjust(int8_t wav, uint8_t vol)
348	{
349	// The result is an integer value, but we store it as a float because
350	// then we need fewer int->float conversion (compared to converting in
351	// generateChannels()).
352	return float((int(wav) * vol) >> 4);
353	}
354
355	void SCC::writeWave(unsigned channel, unsigned address, uint8_t value)
356	{
357	// write to channel 5 only possible in SCC+ mode
358	assert(channel < 5);
359	assert((channel != 4) \|\| (currentMode == Mode::Plus));
360
361	if (!readOnly[channel]) {
362	unsigned p = address & 0x1F;
363	auto sValue = narrow_cast<int8_t>(value);
364	wave[channel][p] = sValue;
365	volAdjustedWave[channel][p] = adjust(sValue, volume[channel]);
366	if ((currentMode != Mode::Plus) && (channel == 3)) {
367	// copy waveform 4 -> waveform 5
368	wave[4][p] = wave[3][p];
369	volAdjustedWave[4][p] = adjust(sValue, volume[4]);
370	}
371	}
372	}
373
374	void SCC::setFreqVol(unsigned address, uint8_t value, EmuTime time)
375	{
376	address &= 0x0F; // region is visible twice
377	if (address < 0x0A) {
378	// change frequency
379	unsigned channel = address / 2;
380	unsigned per =
381	(address & 1)
382	? ((value & 0xF) << 8) \| (orgPeriod[channel] & 0xFF)
383	: (orgPeriod[channel] & 0xF00) \| (value & 0xFF);
384	orgPeriod[channel] = per;
385	if (deformValue & 2) {
386	// 8 bit frequency
387	per &= 0xFF;
388	} else if (deformValue & 1) {
389	// 4 bit frequency
390	per >>= 8;
391	}
392	period[channel] = per;
393	incr[channel] = (per <= 8) ? 0 : 32;
394	count[channel] = 0; // reset to begin of byte
395	if (deformValue & 0x20) {
396	pos[channel] = 0; // reset to begin of waveform
397	// also 'rotation' mode (confirmed by test based on
398	// Artag's SCC sample player)
399	deformTimer.advance(time);
400	}
401	// after a freq change, update the output
402	out[channel] = volAdjustedWave[channel][pos[channel]];
403	} else if (address < 0x0F) {
404	// change volume
405	unsigned channel = address - 0x0A;
406	volume[channel] = value & 0xF;
407	for (auto i : xrange(32)) {
408	volAdjustedWave[channel][i] =
409	adjust(wave[channel][i], volume[channel]);
410	}
411	} else {
412	// change enable-bits
413	ch_enable = value;
414	}
415	}
416
417	void SCC::setDeformReg(uint8_t value, EmuTime time)
418	{
419	if (value == deformValue) {
420	return;
421	}
422	deformTimer.advance(time);
423	setDeformRegHelper(value);
424	}
425
426	void SCC::setDeformRegHelper(uint8_t value)
427	{
428	deformValue = value;
429	if (currentMode != Mode::Real) {
430	value &= ~0x80;
431	}
432	switch (value & 0xC0) {
433	case 0x00:
434	std::ranges::fill(rotate, false);
435	std::ranges::fill(readOnly, false);
436	break;
437	case 0x40:
438	std::ranges::fill(rotate, true);
439	std::ranges::fill(readOnly, true);
440	break;
441	case 0x80:
442	for (auto i : xrange(3)) {
443	rotate[i] = false;
444	readOnly[i] = false;
445	}
446	for (auto i : xrange(3, 5)) {
447	rotate[i] = true;
448	readOnly[i] = true;
449	}
450	break;
451	case 0xC0:
452	for (auto i : xrange(3)) {
453	rotate[i] = true;
454	readOnly[i] = true;
455	}
456	for (auto i : xrange(3, 5)) {
457	rotate[i] = false;
458	readOnly[i] = true;
459	}
460	break;
461	default:
462	UNREACHABLE;
463	}
464	}
465
466	void SCC::generateChannels(std::span<float*> bufs, unsigned num)
467	{
468	unsigned enable = ch_enable;
469	for (unsigned i = 0; i < 5; ++i, enable >>= 1) {
470	if ((enable & 1) && (volume[i] \|\| (out[i] != 0.0f))) {
471	auto out2 = out[i];
472	unsigned count2 = count[i];
473	unsigned pos2 = pos[i];
474	unsigned incr2 = incr[i];
475	unsigned period2 = period[i] + 1;
476	for (auto j : xrange(num)) {
477	bufs[i][j] += out2;
478	count2 += incr2;
479	// Note: only for very small periods
480	// this will take more than 1 iteration
481	while (count2 >= period2) [[unlikely]] {
482	count2 -= period2;
483	pos2 = (pos2 + 1) % 32;
484	out2 = volAdjustedWave[i][pos2];
485	}
486	}
487	out[i] = out2;
488	count[i] = count2;
489	pos[i] = pos2;
490	} else {
491	bufs[i] = nullptr; // channel muted
492	// Update phase counter.
493	unsigned newCount = count[i] + num * incr[i];
494	count[i] = newCount % (period[i] + 1);
495	pos[i] = (pos[i] + newCount / (period[i] + 1)) % 32;
496	// Channel stays off until next waveform index.
497	out[i] = 0.0f;
498	}
499	}
500	}
501
502
503	// Debuggable
504
505	SCC::Debuggable::Debuggable(MSXMotherBoard& motherBoard_, const std::string& name_)
506	: SimpleDebuggable(motherBoard_, name_ + " SCC",
507	"SCC registers in SCC+ format", 0x100)
508	{
509	}
510
511	uint8_t SCC::Debuggable::read(unsigned address, EmuTime time)
512	{
513	const auto& scc = OUTER(SCC, debuggable);
514	if (address < 0xA0) {
515	// read wave form 1..5
516	return scc.readWave(address >> 5, address, time);
517	} else if (address < 0xC0) {
518	// freq volume block
519	return scc.getFreqVol(address);
520	} else if (address < 0xE0) {
521	// peek deformation register
522	return scc.deformValue;
523	} else {
524	return 0xFF;
525	}
526	}
527
528	void SCC::Debuggable::write(unsigned address, uint8_t value, EmuTime time)
529	{
530	auto& scc = OUTER(SCC, debuggable);
531	if (address < 0xA0) {
532	// read wave form 1..5
533	scc.writeWave(address >> 5, address, value);
534	} else if (address < 0xC0) {
535	// freq volume block
536	scc.setFreqVol(address, value, time);
537	} else if (address < 0xE0) {
538	// deformation register
539	scc.setDeformReg(value, time);
540	} else {
541	// ignore
542	}
543	}
544
545
546	static constexpr auto chipModeInfo = std::to_array<enum_string<SCC::Mode>>({
547	{ "Real", SCC::Mode::Real },
548	{ "Compatible", SCC::Mode::Compatible },
549	{ "Plus", SCC::Mode::Plus },
550	});
551	SERIALIZE_ENUM(SCC::Mode, chipModeInfo);
552
553	template<typename Archive>
554	void SCC::serialize(Archive& ar, unsigned /version/)
555	{
556	ar.serialize("mode", currentMode,
557	"period", orgPeriod,
558	"volume", volume,
559	"ch_enable", ch_enable,
560	"deformTimer", deformTimer,
561	"deform", deformValue);
562	// multi-dimensional arrays are not directly support by the
563	// serialization framework, maybe in the future. So for now
564	// manually loop over the channels.
565	std::array<char, 6> tag = {'w', 'a', 'v', 'e', 'X', 0};
566	for (auto [channel, wv] : enumerate(wave)) {
567	tag[4] = char('1' + channel);
568	ar.serialize(tag.data(), wv); // signed char
569	}
570
571	if constexpr (Archive::IS_LOADER) {
572	// recalculate volAdjustedWave
573	for (auto channel : xrange(5)) {
574	for (auto p : xrange(32)) {
575	volAdjustedWave[channel][p] =
576	adjust(wave[channel][p], volume[channel]);
577	}
578	}
579
580	// recalculate rotate[5] and readOnly[5]
581	setDeformRegHelper(deformValue);
582
583	// recalculate incr[5] and period[5]
584	// this also (possibly) changes count[5], pos[5] and out[5]
585	// as an unwanted side-effect, so (de)serialize those later
586	// Don't use current time, but instead use deformTimer, to
587	// avoid changing the value of deformTimer.
588	EmuTime time = deformTimer.getTime();
589	for (auto channel : xrange(5)) {
590	unsigned per = orgPeriod[channel];
591	setFreqVol(2 * channel + 0, (per & 0x0FF) >> 0, time);
592	setFreqVol(2 * channel + 1, (per & 0xF00) >> 8, time);
593	}
594	}
595
596	// call to setFreqVol() modifies these variables, see above
597	ar.serialize("count", count,
598	"pos", pos,
599	"out", out); // note: changed int->float, but no need to bump serialize-version
600	}
601	INSTANTIATE_SERIALIZE_METHODS(SCC);
602
603	} // namespace openmsx

Keyboard